Stainless Steel Pneumatic Ball Valve

Keywords: metering pump accessories

Classification:

Pneumatic ball valve

Return to List

DESCRIPTION

Commodity name: Stainless Steel Pneumatic Ball Valve

Performance advantages of stainless steel pneumatic ball valve:
1. The stainless steel ball valve is made of silica sol precision casting and is connected to a pneumatic actuator. It can not only serve as a switch and cutoff, but also as a flow regulator.
2. Diversified selection. By choosing different valve body and valve seat materials, it can be applied to different working conditions and media.

3. It has a wide range of applications and can be used in normal temperature and pressure situations, as well as in high temperature, high pressure and low temperature conditions.

4. Pneumatic stainless steel ball valves use gas as the power source, and the pressure is generally around 0.4-0.7MPa, which is relatively safe. If there is a gas leak, the gas can be discharged directly, causing no pollution to the environment and having high safety.

Stainless Steel Pneumatic Ball Valve Accessory Options:

Echo device: also called limit switch, remote feedback switch signal (can be explosion-proof)

Solenoid valve: choose two-position five-way for double-acting, choose two-position three-way for single-acting (can be explosion-proof)

Triple piece: can stabilize the air source, filter, and add lubricating oil to the cylinder

Cut-off accessories: single solenoid valve, double solenoid valve, limit switch transmitter.

Adjustable accessories: electrical positioner, pneumatic positioner, electrical converter.

Air source treatment accessories: air filter pressure reducing valve, air source treatment triple piece.

Manual mechanism: turn the hand wheel mechanism to manually switch the valve

Stainless steel pneumatic ball valve structure diagram

Technical parameters of stainless steel pneumatic ball valve:

Nominal diameter	DN15～DN300(mm)
Nominal pressure	1.0、1.6、2.5、6.4MPa
Drive form	Pneumatic control (compression 04-07Mpa)
Connection method	Flange connection
Reply voltage	AC220V/DC24V
temperature range	-40℃～450℃
Action form	Single-acting (gas on, gas off, air source failure reset); double-acting (ventilation on, ventilation off)
Valve body material	Stainless steel 304, stainless steel 316, stainless steel 316L
control method	Switch type (switch two-position cut-off control), regulating type (4-20mA analog signal)
Applicable media	Steam, water, liquid, gas, corrosive media, etc. (normal temperature, low temperature, high temperature and high pressure)

Standard specifications for stainless steel pneumatic ball valves:

1. Main inspection test: JB/T 9092, API 598.

2. Design and manufacturing: GB12237-89, API608, API 6D, JPI 7S-48, BS5351, DIN3357.

3. Flange size: JB/T74～90 (JB74～90), GB9112～9131, HGJ44～76, SH3406, JIS B2212～2214, NF E29-211, DIN2543.

4. Structural length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202.

Jx Plunger Metering Pump

Gm Type Mechanical Diaphragm Metering Pump

Jt Type Plunger Metering Pump

Mechanical Diaphragm Metering Pump

Welcome to negotiate consultation

021-66260866

Address: Floor 1, Building 1, No.21, Performance Road, Baoshan District, Shanghai
Telephone:021-56467898
Mobile:17302165706Ms. Gu
18501628796Manager Li
Fax: 021-66125728

Sweep the attention to us

Business License